Third-Party Apple Watch Bands May Be Coming Soon Following Launch of New Guidelines

Apple today debuted a new developer site (via Macotakara) titled “Creating Bands for Apple Watch”, which includes band design guidelines for third-party companies looking to make bands for the Apple Watch. The design guidelines include requirements for the bands to achieve Apple certification in the new Made for Apple Watch program, which is similar to the already established Made for iPhone program.

Apple Watch bands are easily changed with simple release buttons and lugs that secure the band to the Apple Watch case. When creating your custom bands, refer to the band design guidelines and lug profile. Apple Watch lugs will be available soon through the Made for Apple Watch program.

Firstly, the bands must integrate with the two lugs that mate with the Apple Watch Band Interface. They also should not integrate magnetic chargers and the lug latch must never be jammed while in an extended position. Bands also cannot prevent a user’s skin from maintaining direct contact with the Watch’s heart rate sensors or general back area. The band themselves must also compensate for any potential shifting or dimensional changes in material.

Apple also has recommendations for the materials that lugs and lug latches should be made of, with the lugs being made out of a specific silicone, nylon or stainless steel while lug latches are recommended to be made out of either nylon or stainless steel. Other requirements for band materials include compliance with applicable environmental regulations in regions where bands are intended to be sold.

Finally, Apple has physical requirements for what the bands for Apple Watch are not allowed to do, which include not obstructing Apple Watch hardware items like the mic or speaker, the charging pad, the antenna, and the heart rate sensors. They also cannot extend beyond the sensor windows, cover the glass or interfere with the Digital Crown or Force Touch.

While the Apple Watch only launched a little over a week ago and many early adopters have yet to receive their new devices, interest in third-party bands has been growing, with some using parts from the Classic Buckle to make their own custom bands. The guidelines for the Made for Apple Watch program are now available, and it’s likely the first official third-party bands could be seen in the coming months.

Remote for Next-Generation Apple TV to Include ‘Touch Pad’ for Scrolling

Apple’s next-generation Apple TV will include a new touch-based remote with a revamped design, reports The New York Times, citing sources with knowledge of Apple’s plans. Described as being “slightly thicker” than the current version, the new Apple TV remote will gain a “touch pad” that will be used for scrolling, along with two physical buttons.

The touch pad will likely replace the circular click-wheel style control that’s on the existing remote, giving users an easier way to scroll through content on the Apple TV. Currently, navigating through content on a channel like Netflix with the Apple TV remote requires users to click multiple times on the click wheel.

A touch-based control area on the remote would likely function similarly to the Apple Remote apps on the iPhone and the Apple Watch, allowing for swipe-based controls for scrolling through content available on the Apple TV. Using the Apple Watch or the iPhone to browse channels and make selections on the existing Apple TV is both quicker and easier than using the current physical remote.

Size wise, The New York Times’ source says the new remote will be similar in design to the remote control for the Amazon Echo speaker system, which is approximately 0.6 inches thick. The current Apple TV remote is 0.2 inches thick and has not seen a redesign since the Apple TV initially debuted in 2007.

Rumors have suggested that Apple’s redesigned Apple TV could make an appearance in June, at the annual Worldwide Developers Conference. Along with today’s rumor pointing towards a new design for the remote, previous rumors have indicated the device will include an A8 processor, Siri integration, a dedicated App Store, and expanded internal storage.

Apple is also rumored to be working on an accompanying Internet-based television service, which may see it providing between 20 and 30 channels at a price of $30 to $40 per month.

GE announces HomeKit enabled lights that’ll help you sleep

Turns out it’s not just our addiction to smartphones that messes with our sleep patterns, it’s also the lighting in our homes that keeps us up at night. To alleviate all that tossing and turning, GE announced an Intelligent LED lighting system that not only works with HomeKit, Apple’s slow-to-rollout home automation system, but also features GE Align to set the color of the lights to the “body’s natural sleep circadian rhythm.” The Philips Hue line currently does the same thing via “recipes” and is also integrated with HomeKit. GE’s lighting system, on the other hand, won’t be out until later this year. Of course being first to integrate with Apple’s home automation system is a bit of a moot point since it currently doesn’t have an official launch date.

Filed under: Household, Wireless, Apple

Comments

Source: GE

Apple Hires New General Contractor for Apple Campus 2, Sparking Delay Speculation

As construction on its “spaceship” campus in Cupertino continues, Apple has hired a new general contractor, sparking rumors questioning whether the new campus will be finished by the company’s prospective 2016 completion date.

According to the Silicon Valley Business Journal, Silicon Valley company Rudolph & Sletten Inc. will take on the buildout of the Campus 2’s interior structure, a job that was previously thought to be going to DPR Construction Co. and Skanska USA, the two companies heading up the construction project.

Most recent image of the ongoing construction of Apple Campus 2, from the City of Cupertino.

It’s unclear why Rudolph & Sletten is being brought in and exactly what DPR/Skanska’s involvement will be going forward. Two sources said the DPR-Skanska joint venture would still complete the core and shell — or the basic structure — of the circular building. It’s also possible that DPR and Skanska never intended to do more than the core and shell.

Neither Apple nor the three companies involved in the construction of the main ring-shaped building would comment on the involvement of a new general contractor for the interior of the building, but sources in the local construction industry that spoke to the Silicon Valley Business Journal believe the new addition could potentially point towards delays.

Campus 2 delays could potentially end up causing the cost of constructing the massive structure to skyrocket beyond its current $5 billion estimation. Prior budgeting issues caused Apple to revise its Campus 2 plans, splitting construction into two phases to save money. Phase 1 includes the main Apple campus and several buildings like an auditorium and fitness center, while phase 2 focuses on the Tantau Development, a 600,000 square foot area housing research facilities. Plans for the second phase of construction were submitted to the city back in October of 2014.

The Tantau development area
In Cupertino, the base structure for the main ring-shaped campus has been completed, and walls have been going up for the last several months. Construction is also continuing on an underground parking garage and several ancillary buildings

Apple’s second campus will feature a massive 2.8 million square foot ring-shaped main building, an underground parking facility capable of accommodating 2,400 cars, a 100,000 square foot fitness center, and a 120,000 square foot auditorium. The entire campus will be outfitted with hundreds of trees for 80 percent green space, along with a central garden with outdoor dining areas.

Thus far, city officials have not received word of a potential delay from Apple, suggesting construction may still be on track. Apple plans to complete its new campus by the end of 2016.

Classic and Modern Buckle Band Parts Let Third-Party Bands Connect to Apple Watch [iOS Blog]

There are few third-party band options available for the Apple Watch at the current point in time given that it just launched a week and a half ago, but those of you who purchased a stainless steel Apple Watch with a Classic Buckle or Modern Buckle band can use the components from those bands to connect standard watch bands to your Apple Watch devices.

In a newly published video, Lewis Hilsenteger of Unbox Therapy walks through the process of using the parts in the Classic Buckle band to connect a 22mm third-party watch band to the Apple Watch.

As it turns out, there are two small pentalobe screws holding the pin component of the Classic Buckle together, so with a pentalobe screwdriver, the portion of the band that connects to the Apple Watch can be disassembled, slid into a standard pin-based watch band, and reassembled.

The Modern Buckle and the Classic Buckle are the only two bands that have a pin-based connector built-in, so those of you who want to use different watch bands with your Apple Watch devices will need to either purchase one of the models that comes with a Classic Buckle band or purchase a Classic Buckle band separately for $149 (estimated to ship out in May). The Modern Buckle has the same connector, but Modern Buckle Apple Watches have not yet shipped out and those bands are listed as “Currently Unavailable” in the online Apple Store.

Along with a compatible Apple Watch band, a tiny pentalobe screwdriver is also required to swap out the band, but those are available at little cost. With a Classic Buckle and the screwdriver, making a swap is as uncomplicated as simply removing two screws, pulling apart the connector, sticking the pieces into another watch band, and putting it back together again.

Google Acquires iOS-Based Time Management App Timeful [iOS Blog]

Google today announced an acquisition of iOS-based time management app Timeful, which first launched last year. When it was released, Timeful was described as “the first intelligent time manager” for mobile devices, aiming to help users manage their lives by combining a time management app with a calendar, a to-do list, and reminders designed to reinforce positive habits.

In its current incarnation on iOS, Timeful connects to the Calendar app to import existing events into a daily view that includes all tasks that need to be completed. It also lets users create to-dos, and when there’s a block of open time on a user’s schedule, Timeful will insert “Habits.” Habits are user-defined tasks like “Take a Walk” or “Read for 30 Minutes,” and are aimed at fitting recreation or skill-building tasks into each user’s schedule.

Google plans to incorporate Timeful‘s clever time management tools into its existing products like Inbox and Calendar, making it easier for users to schedule events and find time for all tasks that need to be completed in any given day.

The Timeful team has built an impressive system that helps you organize your life by understanding your schedule, habits and needs. You can tell Timeful you want to exercise three times a week or that you need to call the bank by next Tuesday, and their system will make sure you get it done based on an understanding of both your schedule and your priorities. We’re excited about all the ways Timeful’s technology can be applied across products like Inbox, Calendar and beyond, so we can do more of the work for you and let you focus on being creative, having fun and spending time with the people you care about.

According to a blog post on the Timeful site, the Timeful app will continue to be available on iOS, but going forward, attention will be on “new projects at Google.” Current Timeful users can export their data out of the app for use with other apps if desired.

Microsoft Updates Windows 10 Emoji to Resemble Apple’s Collection [iOS Blog]

Microsoft has included several redesigned emoji in Windows 10 that resemble Apple’s emoji found on iPhone, iPad and Mac, including a wide range of faces and even the “sassy” information desk person (via Emojipedia). The update also includes skin tone modifiers, the middle finger, a new haircut emoji and more, although country flags are still not supported on the upcoming operating system.

Windows 10 is currently available in beta for developers and is expected to be released to the public in July. The latest version of Windows will deliver a unified experience and platform integration that will make it easy to put one device down and continue where you left off on another device. The software update will be free for Windows 8.1 and Windows 7 users for the first year.

Many emoji character sets have been incorporated into Unicode, resulting in the icons being standardized across multiple platforms such as iOS, Android, OS X and Windows. The exact appearance of emojis is then left up to companies like Apple, Microsoft, Google and Twitter to decide. In this case, Microsoft’s redesigned emoji and the addition of skin tone modifiers is more uniform with Apple’s collection.

GE to Create Intelligent LED Lightbulbs Compatible with Apple HomeKit

GE today announced plans to take advantage of Apple’s HomeKit platform, creating intelligent, color-charging LED lightbulbs that will interface with iOS devices. GE’s HomeKit-compatible LED lightbulbs will include GE’s Align technology, which aims to improve sleep through controlling blue light output at critical times.

During the day, the Align technology is able to mimic daylight to suppress the production of melatonin for a more awake feeling, adding bright blue tones to white light, and at night, blue light is reduced to promote melatonin production and avoid disrupting circadian sleep rhythms.

“As we continue to grow our infrastructure business by connecting our brilliant industrial machines to the Internet, it is important that consumers experience connected things in easy-to-use, everyday ways. Lighting is how many first experiment with the idea of a smart home, and our insights show that consumers want the ability to control lighting from anywhere, automate lighting and pair lighting with other devices–like sensors, thermostats and door locks,” says Comstock. “We’re excited to announce our support for HomeKit as it will bring a seamless, intuitive user experience using Siri and superior quality of light from America’s most trusted lighting brand for more than a century.”

HomeKit is Apple’s home control platform that will allow Apple devices to control various connected smart home products like lightbulbs, garage doors, locks, fans, thermostats, power outlets, and more. Users will be able to give Siri commands to perform actions that will control physical objects, such as “shut off the lights” or “close the garage,” with the Apple TV serving as a home automation hub.

Through HomeKit, the GE bulbs will integrate with other HomeKit-connected devices and will be able to be controlled by voice using Siri. Lightbulbs will be available for individual control and can also be organized into groups for room-wide lighting scenes.

GE’s upcoming lighting project will be a direct competitor to the Philips hue line of lights, which also allow consumers to choose lighting colors based on mood and control lights with their iOS devices. Philips is also one of Apple’s HomeKit partners and plans to have its hue lighting system integrate with HomeKit.

Apple’s HomeKit hardware specifications were finalized in October of 2014, further paving the way for the first HomeKit devices to come to market. In January, Apple said it was “excited” about the growing number of partners bringing HomeKit products to market. Some of those upcoming products include the iDevices smart plug, Elgato’s range of connected home devices, and the Schlage Sense smart lock.

We still don’t know when HomeKit-enabled devices will be widely available for purchase, but GE says that its lightbulbs will be available later in 2015.

Apple Urging Music Labels to Stop Licensing Free Songs on Spotify and YouTube

Apple has been leveraging its power within the music industry in an attempt to push music labels to stop licensing freemium tiers offered by Spotify and other streaming music services, according to The Verge. The company has also reportedly offered to pay YouTube’s music licensing fee to Universal Music Group if the label stops allowing its songs on the website, a popular destination for music videos.

The report claims that U.S. Department of Justice officials are looking into Apple’s business practices in relation to its upcoming streaming music service, expected to be a rebranded version of Beats Music that will debut at WWDC next month. “DOJ officials have already interviewed high-ranking music industry executives about Apple’s business habits,” the report claims.

Apple’s much-rumored Beats streaming service would naturally be a more competitive alternative over two of its biggest rivals in Spotify and YouTube if it successfully convinces music labels to force streaming services to ditch their freemium tiers. Apple’s service is expected to have lots of exclusive content, and only about one-quarter of Spotify’s 60 million customers have paid subscriptions.

Apple faces a similar probe from the European Commission over concerns that it’s persuading labels to abandon free, ad-supported services such as Spotify in Europe as well. Apple’s own Beats streaming service will reportedly not offer a free tier, requiring customers to pay a recurring fee of around $9.99 per month, similar to Spotify, Rdio and Google Play Music.

Apple’s Beats-based streaming music service will reportedly be deeply integrated into iTunes on Mac and the stock Music app for iPhone, iPad and iPod touch, and apps will also be available for Apple TV and Android. Last month, the company seeded iOS 8.4 beta to developers with a redesigned Music app featuring new MiniPlayer, a redesigned look for “Now Playing,” global search capabilities, a streamlined design and more.